#	test.properties
#
#	This is your "test.properties" file used to customize OurGrid
#	tests to your local environment. It  defines some test
#	defaults, grid machines to test and some locations of files
#	and directories.


#================================================================
#	
#	Peer
#
#	Here you may define the properties required to start and run
#	a peer.  Notice that you must set your local machine in the
#	peer.name.
#	
#================================================================
peer.name=foca.lsd.ufcg.edu.br 
peer.port=9032
peer.port.II=10032
peer.port.III=11032
peer.corepeerport=8032
peer.corepeername=localhost

# Should be the same as used by peer.corepeerport
corepeer.port=8032
corepeer.name=localhost

#================================================================
#	
#		System
#
#================================================================
system.temp.dir=/tmp
rmi.port=7032

gui.port=12032

#	Local Machine Settings
mg.homemachine=foca.lsd.ufcg.edu.br
mg.port=6032
mg.persist.jobid=no
fake.port=12321
fake.file=/tmp/xpto_file492
fake.machine=xpto1
protected.file=/etc/passwd
protected.dir=/root


#	Outside the local machine
remote.fake.machine=xpto_machine
remote.fake.file=/tmp/12345
remote.protected.file=/etc/passwd
remote.protected.dir=/root
remote.temp.dir=/tmp
remote.file=/etc/passwd


#================================================================
#	
#		Jobs
#
#================================================================

#	Job file in default jobs directory.
job.simple=test/resources/SimpleJob1.jdf
job.stress=test/resources/SimpleJob2.jdf
job.storage=test/resources/SimpleJob4.jdf
job.simpletask=test/resources/OneSimpleTask.jdf
job.custom=CustomJob.jdf



#================================================================
#	
#		Grid Machines
#
#================================================================

# Default values to mygump in GDF creation process.
mygump.default.port=5032
mygump.default.playpenroot=/tmp
mygump.default.storagedir=/tmp
mygump.default.remexec=ssh -x $machine $command
mygump.default.copyfrom=scp $machine:$remotefile $localfile
mygump.default.copyto=scp $localfile $machine:$remotefile


#	Linux UA Machines
#
#	Order of attributes to be setted: 
#	{name, port, playpenroot, storagedir, remexec, copyto, copyfrom}
#
#	You need set all properties that preceds the desired
#	costumized attribute of a GuM, examples:
#
#		mygump.machine.ualinux.1={machinename}
# 		mygump.machine.ualinux.2={machinename, 3321, /tmp}
# 		mygump.machine.ualinux.3={machinename, 8320} 

mygump.machine.ualinux.1={escrivao.lsd.ufcg.edu.br}
mygump.machine.ualinux.2={solteira.lsd.ufcg.edu.br}
mygump.machine.ualinux.3={barbado.lsd.ufcg.edu.br}
mygump.machine.ualinux.4={localhost, 44032}
mygump.machine.ualinux.5={localhost, 34032}
mygump.machine.ualinux.6={localhost, 24032}


#	Windows UA Machines
#
#	Order of attributes to be setted:
#	{name, port, playpenroot, storagedir, remexec, copyto, copyfrom}

mygump.machine.uawindows.1={solteira.lsd.ufcg.edu.br}


#	Local UA Machine
#
#	Some tests may require use your local machine as a GuM.
#
#	Order of attributes to be setted:
#	{name, port, playpenroot, storagedir, remexec, copyto, copyfrom}

mygump.machine.localhost.1={localhost,4032}


#	Custom UA Machines
#
#	Set here the custom UA type that will be used.
#
#	Order of attributes to be setted: 
#	{name, playpenroot,	storagedir, remexec, copyto, copyfrom}
#
#	You need set all properties that preceds the desired
#	costumized attribute of a GuM, examples:
#
# 		mygump.machine.CustomType.1={customType1} 


#=================
#
# Security
#
#================
keystore.filename=test/resources/keystore
keystore.password=qwerty
truststore.filename=test/resources/truststore
truststore.password=ytrewq
invalid.truststore.filename=test/resources/invalidtruststore
invalid.truststore.password=invalid


#=================
#
# MultiProcessing
#
#================
job.simpleMP=test/resources/SimpleMPJob.jdf